UNS N10276

Category：Nickel-base AlloyPublishedDate：2019-05-17

1. Standard

Standard  ：ASTM B622

2. Chemical Composition

Elements C Mn P S Si Cr Mo Ni W V Co Fe
Min           14.5 15.0 Remainder 3.0     4.0
Max 0.01 1.0 0.04 0.03 0.08 16.5 17.0   4.5 0.35 2.5 7.0
Actual value 0.004 0.01 0.02 0.00
17		 0.06 15.57 15.79 59.19 3.76 0.2 0.018 5.07
 

3.Mechanical Properties

  Tensile Strength
MPa		 Yield Strength
MPa		 Elongation
%
  Min 690 283 40
  Max      
  Actual value 776 374 60

4.  Typical Size

Size Outside Diameter
mm

Permissible Variations

in Outside Diameter
mm		 Wall Thickness
mm

Wall Permissible Variations

in Wall Thickness
45*3..0 45 ±0.25 3.0 ±10%S
 
Note:Standard requirements control range:OD：±0.25mm，WT：±10%S

5. Typical Application Environment

    It has been widely used in chemical and petrochemical fields, For example，It can used in equipment components and catalytic systems which contact with chlorinated organic compounds.This material is especially suitable for use in high temperature, mixed inorganic acid and organic acids (such as formic acid and acetic acid) and seawater corrosive environment.

PRODUCT CENTER

Copyright © Xinxing Pipes All rights reserved    ICP prepared 16003241 number